Alaidon subwoofer audio

Looking to build a subwoofer used for 2 Kenwood 12 "subwoofers W3012?.

I searched a lot in building envelopes and would like some advice professional settings box on the right. I looked at the manual, which shows the specifications for a subwoofer speaker box, but only a reflection of the design seems a little suspicious. Any help would be greatly appreciated. Thank you. =)

even if it is a picture of two subs just treat them as boxes sepret somehow. Each cabinet requires clean feathers. So basically what we're doing is doubling the requirement of the Subcommittee and put a partition to separate the woofers. If the speakers Kenwood 12 'W3012 require 2Cu m each, after moving the speakers just built a box of about 4.2 cubic feet and a separation wall. On the pitch just treat each side as the box is clean, if a port on each side of each speaker and the use of this view URL to take the rest of how you can design your picture and the stage is for you, remember to put nearly 32 HRTS thats where the best speakers in http://reaudio.com/speaker_box/LPort_Box_Calc preforms. HTML not forget a side of the box, both in the mirror and show results, and good luck